NRC PIC O2 analyser with BCD adapter set
The NRC PIC O2 analyser with matching BCD adapter: everything for fast Nitrox analysis in one set.
- Everything in one set Analyser and BCD adapter
- Straight onto your BCD Without unscrewing the first stage
- For every mixture From Nitrox to pure oxygen
- Long-life sensor Factory-replaceable if required
Currently out of stock. Write to us at info@vtm-dive.com and we will let you know when it is back.
SKU NRC-468-BCD
Everything you need to analyse.
The set contains the NRC PIC O2 analyser and the matching BCD adapter.
The PIC is a compact oxygen analyser with an electrochemical sensor and microcontroller. With the BCD adapter, you analyse your Nitrox straight at the inflator port of your BCD.
Measure before you dive.
-
Calibrate
Hold the button on the top pressed until
CAappears on the display. The analyzer automatically calibrates to 21 vol% O2 (air). -
Using the BCD adapter
The BCD adapter replaces the T-piece and sits directly on the analyser. This way you plug it into the inflator port of your BCD without unscrewing the first stage.
-
Reading
After a moment, the display shows the oxygen content of your cylinder in volume percent.
Example display readings
See it in action.
Small in luggage, big on safety.
The NRC PIC is robust enough for the harsh environment of a dive center and an ideal travel companion if you value fast and precise oxygen analysis.
- Cheaper as a set than both parts separately
- Robust for everyday use at the dive center
Technical data
Data at 1013 hPa, 25 °C and dry ambient air. Source: NRC International GmbH.
Download data sheet (PDF)- Included
- NRC PIC O2 analyser, BCD adapter
- Measuring principle
- Galvanic oxygen sensor
- Measuring range
- 0 – 99% O2
- Accuracy
- ± 0.5 vol.% O2 (0 – 50 % O2)
- Resolution
- 1 vol%
- Measurement time / Response time
- 1 s / < 2 s
- Display
- 2-digit, 12.7 mm
- Calibration
- One-button calibration to 21 vol.% O2
- Connection
- M16x1
- Workspace
- 0 – 50 °C
- Storage
- ideal 5 – 25 °C · max. −5 to 60 °C
- Sensor life
- approx. 2 years
- Weight
- approx. 80 g
- Dimensions (H×W×D)
- 74 × 48 × 59 mm
- Manufacturer
- NRC International GmbH, Bergneustadt
Frequently asked questions
What is included in the set?
The set contains the NRC PIC O2 analyser and the matching BCD adapter.
Can I also buy both separately?
Yes. The analyser and the BCD adapter are also available separately. In the set, you pay less than for both parts together.
Why do I need an O2 analyzer?
When diving with Nitrox, every percent counts. With the analyzer, you can check the oxygen content in your tank yourself before you enter the water.
How do I calibrate the NRC PIC?
Via the button on the top: press and hold the button until "CA" appears on the display. The analyzer will then automatically calibrate to 21 vol.% O2.
How long does the sensor last?
The sensor has a service life of at least 2 years. If it needs to be replaced, this can be done at the factory at NRC.
Does it fit my valve?
The connection is M 16x1. NRC offers various sampling sets that allow the analyzer to be connected to any nitrox valve. A BCD sampling set also allows for analysis via the inflator hose. Not sure? Just write to us.
Questions about the set?
We are happy to advise you personally from our dive base in Xanten.