NRC PIC O2 analyser with hose extraction set
The NRC PIC O2 analyser with matching hose extraction set: everything for fast Nitrox analysis at the cylinder valve in one set.
- Everything in one set Analyser and hose extraction set
- Straight at the cylinder valve Secured with a rubber band
- Splash protection The small opening protects the sensor
- Long-life sensor Factory-replaceable if required
Currently out of stock. Write to us at info@vtm-dive.com and we will let you know when it is back.
SKU NRC-468-SES · EAN 4262538420026
Everything you need to analyse.
The set contains the NRC PIC O2 analyser and the matching hose extraction set.
The PIC is a compact oxygen analyser with an electrochemical sensor and microcontroller. With the hose extraction set, you analyse your Nitrox straight at the cylinder valve, and the analyser stays protected from splashing water.
Measure before you dive.
-
Calibrate
Hold the button on the top pressed until
CAappears on the display. The analyzer automatically calibrates to 21 vol% O2 (air). -
Using the hose extraction set
The hose extraction set replaces the T-piece. You slip it over the cylinder valve and secure it with the supplied rubber band.
-
Reading
After a moment, the display shows the oxygen content of your cylinder in volume percent.
Example display readings
See it in action.
Small in luggage, big on safety.
The NRC PIC is robust enough for the harsh environment of a dive center and an ideal travel companion if you value fast and precise oxygen analysis.
- Cheaper as a set than both parts separately
- Robust for everyday use at the dive center
Technical data
Data at 1013 hPa, 25 °C and dry ambient air. Source: NRC International GmbH.
Download data sheet (PDF)- Included
- NRC PIC O2 analyser, hose extraction set with rubber band
- Measuring principle
- Galvanic oxygen sensor
- Measuring range
- 0 to 99 % O2
- Accuracy
- ± 0.5 vol.% O2 (0 to 50 % O2)
- Resolution
- 1 vol%
- Measurement time / Response time
- 1 s / < 2 s
- Display
- 2-digit, 12.7 mm
- Calibration
- One-button calibration to 21 vol.% O2
- Connection
- M16x1
- Workspace
- 0 to 50 °C
- Storage
- ideal 5 to 25 °C · max. −5 to 60 °C
- Sensor life
- approx. 2 years
- Weight
- approx. 80 g
- Dimensions (H×W×D)
- 74 × 48 × 59 mm
- Manufacturer
- NRC International GmbH, Bergneustadt
Frequently asked questions
What is included in the set?
The set contains the NRC PIC O2 analyser and the matching hose extraction set with rubber band.
Can I also buy both separately?
Yes. The analyser and the hose extraction set are also available separately. In the set, you pay less than for both parts together.
Why do I need an O2 analyzer?
When diving with Nitrox, every percent counts. With the analyzer, you can check the oxygen content in your tank yourself before you enter the water.
How do I calibrate the NRC PIC?
Via the button on the top: press and hold the button until "CA" appears on the display. The analyzer will then automatically calibrate to 21 vol.% O2.
How long does the sensor last?
The sensor has a service life of at least 2 years. If it needs to be replaced, this can be done at the factory at NRC.
Does it fit my valve?
The hose extraction set is slipped over the cylinder valve and secured with the supplied rubber band. The connection on the analyser is M 16x1. Not sure whether it fits your valve? Just write to us.
Questions about the set?
We are happy to advise you personally from our dive base in Xanten.